Dick Metcalf writes: Ruger is not known for overhyping its products, so when company spokesman Ken Jorgensen stood up in front of me in the conference room at Ruger’s Newport, New Hampshire, plant and said, “we’re about to show you the most significant change in revolver design in the past century,” he had my attention. He also had to convince me he wasn’t just blowing smoke—especially considering that what he was holding appeared, at a casual glance, to be simply another small-frame snubnosed .38.
The new Ruger Lightweight Carry Revolver (LCR) is a compact five-shot .38 Special that weighs only 13 1/2 ounces, has a fully shrouded hammer and double-action-only trigger pull, a 1 7/8-inch barrel, and is rated for +P ammunition. It is essentially the same size as a classic S&W Chiefs Special or Taurus Model 85, and maintains basic holster compatibility with those guns. But here’s the kicker the LCR’s lower half, which contains the entire operating mechanism, is constructed of polymer. Yes, that’s what I said. The Ruger LCR is a +P .38 Special revolver with a plastic frame; it is the first such specimen in the history of firearms.
The LCR consists of three major modular subcomponents an upper-cylinder frame/barrel assembly, a lower-frame fire control housing assembly, and a cylinder/crane assembly. The cylinder frame/barrel assembly is constructed of a 7000-series aluminum forging with a 1714 stainless-steel barrel sleeve threaded into the barrel shroud. There are also hardened insert bushings for the center pin and firing pin opening in the recoil shield at the rear of the cylinder window. The barrel is controlled for barrel/cylinder gap by its thread-in depth (so there is no filing required at the breech end), allowing for a precisely finished and dimensioned forcing cone area for consistent transition of the bullet from the cylinder into the barrel. There are no moving parts in the cylinder frame/barrel assembly except for the cylinder-release latch mechanism; it merely serves as a housing for the cylinder crane assembly and interfaces with the lower-frame/fire-control housing.
For Bloomberg, Steven Komarow writes: U.S. gun makers led by Sturm Ruger & Co. and Smith & Wesson Holding Corp. (SWHC) churned out a record number of firearms in 2012, government data show, continuing a trend of robust production during Democratic presidencies.
“Barack Obama is the stimulus package for the firearms industry”
— Dave Workman
More than 8.57 million guns were produced in 2012, up 31 percent from 6.54 million in 2011, according to data released this week by the U.S. Bureau of Alcohol, Tobacco, Firearms and Explosives, which has been tracking the statistics since 1986.
Almost as many guns — 26.1 million — were produced during Democrat Barack Obama’s first term as president as during the entire eight-year presidency of his Republican predecessor, George W. Bush, the ATF data show.
[Order John R. Lott‘s highly-regarded book: “More Guns, Less Crime: Understanding Crime and Gun Control Laws, Third Edition” (Studies in Law and Economics) from Amazon]
Advocates on both sides of the gun-control debate said manufacturers were meeting demand fueled by concerns among gun owners that Democratic presidents are more willing to limit firearms sales than Republicans. After years of steering clear of the issue, Obama pressed unsuccessfully last year for stricter gun measures in the wake of the 2012 massacre at an elementary school in Newtown, Connecticut.
Useful Gun Owner Links:
- Citizens Committee for the Right to Keep and Bear Arms (CCRKBA)
- Doctors for Responsible Gun Ownership (DRGO)
- International Association for the Protection of Civilian Arms Rights (IAPCAR)
- Keep And Bear Arms (KABA)
- Second Amendment Foundation (SAF)
- Women & Guns
Via The Daily Caller, Ken Jorgensen: Ruger Expands the Popular Line of Lightweight Compact Revolvers with the Addition of the LCRx Sturm, Ruger & Company, Inc. announces the introduction of the LCRx™, the newest variation of the revolutionary Lightweight Compact Revolver (LCR®). Chambered in .38 Special +P, the LCRx™ features an external hammer that allows it to be fired in single-action mode.
“Since its introduction in 2009, the LCR® has become extremely popular with conceal carry customers seeking the simplicity of a revolver,” said Chris Killoy, Ruger Vice President of Sales and Marketing. “Customers have been asking for a traditional double-action version of the LCR® with an external hammer for optional single-action shooting. We were listening and have added a crisp single-action mode to the already smooth double-action LCR®,” he concluded.
The newest LCR® maintains all the features of the critically acclaimed original LCR®. Its double-action-only trigger pull is uniquely engineered with a patented Ruger® friction reducing cam fire control system. The trigger pull force on the LCR® builds gradually and peaks later in the trigger stroke, resulting in a trigger pull that feels much lighter than it actually is. This results in more controllable double-action shooting, even among those who find traditional double-action-only triggers difficult to operate.
Richard L. Johnson writes: One of the most convenient ways to carry a handgun for self-defense is in a pocket. With the right sized gun and a good pocket holster, a gun can ride comfortably and unnoticed in all but the tightest of pants.
Here are my top six guns for pocket carry.
Kahr PM9/CM9 – I think it is hard to beat the Kahr PM9 and CM9 pistols for pocket carry. They offer exceptional reliability and accuracy with a smooth trigger and good sights.
Like all of the guns on this list, these pistols are double action only. Both are chambered in 9mm, and use six round magazines. Unloaded, both guns weigh less than a pound in part due to their polymer frames.
The PM9 and CM9 are substantially the same gun, with the CM9 being the lower cost version. The CM9 uses a number of MIM parts instead of machined parts, a conventional barrel instead of a match grade one, and a pinned front sight instead of a dovetailed one.
I personally own a CM9 and have gotten great reliability with it. The added machining of the PM9 is nice, but I am satisfied with the CM9. MSRP on the PM9 is $786, while the CM9 is $517.